The Valve Tap Product From Mega Power Additives - The Inventor, That Ends Tapping In Minutes Guaranteed

Contact Info: Mega Power's Valve Tap Product. On a smart phone, to ask a question, for ordering this item by phone call me... george at 512 665 3388

More valve tap product helping ldeas

Order Now!  This also includes our daily specials here.

Ordering info.

• Protect both motors for years of trouble free operation - at a discount.

Order 2 Treatments Engine Valve Treatments.

• Clean an protect both your car engine lifters and save $50. 
•  Click cart button to order.
• 12 items total. Easy to enstall.  6 for each motor, each with Bonus items listed. Just $195+ $15 s&h +tax 14 $224. Just $224 total. Not $250. Saving $25 more. Avoiding a tap repair while protecting your good motor.

More included...

Shown above. I call it an engine revitalizing treatment, from Mega Power. An inventor of automotive and heavy equipment engine transmission radiator steering and a/c problem-solvers with similar revitalizing characteristics for those components!

Special MC+ protectors keep tap and other related performance problems they end from returning.

Its 95% success rate - not 2% like other products make this a perfect fix! Easy to use. Quick results assured!

Engine tapping noise this is best remedy around for the job, and for preventing other troubles older engines have. - no kidding! I use it in all my vehicles, and sold it to thousands of car equipment boat owners who quieted their valves tap with it just as easily.

This Mega Power treatment turns back the clock on age, on miles and ends their age, wear related conditions! The reason for its use in good running vehicles to keep them that way.

• The items made of a number of different ingredients work as you drive...
• They crawl to troublesome areas where oil can't go! There, a specialized cleaning, healing, smoothing of stuck lifter parts  stops tapping!
• Those specialized cleaning, healing, smoothing advantages release and free and close the noisy valve lifter gap. Those gap-closing action ENDS, STOPS the tap and restores quiet operation to your motor. That is what you need right now!
• Order this Mega Power Brand valve lifter noise ending product below - to ennd your tap.
• And check out our engine protecting FREE bonus, in the ordering section there, so you can properly fix this problem permanently - our better way!
• And remember, I'm also here to help you. I'm a mechanic, and America's Car Care Expert in these matters!  Book mark this site for future reference

What do engine valve lifters do?

• Your motor's 8 to 24 valves and valve lifter adjusters, are part of the motors fuel, exhaust breathing system.
• They work in hot dirty conditions where motor oil can't do them any good. Over time oil delivery to this part fails, causing tapping. You would think synthetic oil prevents such, but it doesn't.
• As oil blockage to the lifter wear-take-up adjuster makes it collapse, a space on them appears that NOW closes with a bang, producing your tap tap tap sound that worries you.  That's not good for your motor, of course.

The Old Way To End this Motor Problem:

• Traditionally, dismantling the motor to replace the lifters at a $2000 to $5000 expense, is still the way most mechanics do the fix. Its like going in for heart surgery when alternatives like aspirin works just as well.
• Part store additives are sold to end valve lifter noise - but has negative press from engine damage they cause. Stay away from those products.

Science and chemistry's remedy...

• Mega Power Chemistry to the rescue. Mega Power field tested a number of ingredients they found superior to see which reverses the cause of this dirty tap condition, to get oil flowing to end the valve lifter noise problem. This is that formula...
• Mega Power is a Valve Lifter Noise Treatment that cleans, frees, clears to get oil flow again.  
• And with special lube conditioners, gets the noisy adjuster moving outward again, closing the gap, ending the tapping problem. Is that what you want to happen?

There are 2 simple steps for the product install and ordering info

• You follow 2 easy steps, and there is nothing to dismantle. Just add the products as shown. Driving does the fix. Some times instantly. Other times in a few days.
• A few repair shops install the Mega Power Treatment for about $250 to $400, but most oppose its usage. However...
• Its easy to install Mega Power yourself for under $100. Does this method interest you and deserve a try?
• The valve lifter noise ending treatment is delivered to your door in about 3 days with easy-to-follow directions, phone help, a guarantee.
• Men and women vehicle owners find it easy to end valve lifter noise problems and tapping this way.

Ordering info. Order now!

Mega Power Valve Treatment is shipped to your door in a few days with directions and phone help if needed. If you want a quiet motor. Want to avoid an expensive repair bill, try this product that has many happy users. Only 2 refunds ask for last 267 day.

Ordering Info

• Order one Mega Power Valve Treatment. Includes 4 items shown. With easy-to-follow directions. Phone help if needed- a free $100 value. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

Your

Order 2 Treatments Engine Valve Treatments.

• Clean an protect both your car engine lifters and save $50. 6 items, 3 for each motor. $135+ $15 s&h=$150, +tax 14. Just $164 total. Not $190. Save $40.
• Bonus: 2 simple-install Combustion Area Engine Cleaners $56 value, included free for a limited time. A dealership service item they charge up to $400 for installing.
• Extra Bonus: 2 of the above bonus items, and 2 of the most power anti-wear engine protectors known for severe service conditions and racing endurance advantages as extra Bonus items  - to add to both motors. Regular $29 each - Free with this order today! A great extra bonus!
• 4 extra items included with usage info, with the 6 items for your 2 engine servicing valve lifter noise ending treatments.  Click cart button to order.
• 6 items, 3 for each motor, and 4 Bonus items listed. Just $135+ $15 s&h=$150, +tax 14. Just $164 total. Not $190. Saving $80.

Order for both cars to protect them, now, since you're thinking about it! Save $80.  Offer can end without notice.

Order 6 Mega Power Treatments to service 6 motors. Fleet or mechanics resale value. 36 items. $300+ $20s&h=$320 total. Not $450. Order now! Save $130.

Whole vehicle protector special.

Order the Engine$95 and Transmission Treatment$75 and our Bonus $39 Power Steering System Protector Now Free. And Bonus Radiator System Protector $39 also Free. Total 11 items regular $248. Just $150 +$15s&h= $165. Save $83 per set. Order one or more set for just $165 each set. Save $83.   

 

What you should know...Know the following and protect your cars and your cash reserve.

Trouble starts long before the tap appears.

It starts as extremely hot combustion "blows-and by" escapes as you operate your motor, by slipping pass the pistons - see downward arrows.

Blowby sludge's the oil.

When minute amounts of residue blocks oil to the lifters, the lifter piston drops and a space appears.

With each rotation of the engine, the lifter closes the newly-appeared space with a  hammer-like blow you hear as a tap tap tap. That tap is not good, of course.

Blowby, residues and sludge are trouble makers that Mega Power will remove - because oil can't! Our method is offered in the recommendations below.

What are ways to end their tapping?

Oil changes and part store additives have until now, not been able to correct the problem until Mega Power valve treatment  was invented. It works because it cleans and frees the lifter and this restores quiet operation again.

Mega Power works well in transmissions, radiators and steering systems to end their wear and residue caused problems.

Mega Power is installed prior, and during fluid replacements detailed below.

What Mechanic's do.

Traditionally, us mechanics have had to dismantle your engine, get to and replace those many lifters, and do a rebuilding work on the engine to end the problem. Cost run from $1500 for small engines to $4,500 for v6 and v8 engines and diesel motors.

With Mega Power, sludge is removed by penetrents, conditioners and cleaners, a friction remover, and co-polymer to fill worn spaces, that all go where oil and other products cannot to dissolve the sludge. This is done in a 2 step fashion, and with driving involved. Nothing to take a part. Cost is $250 to $450 if a mechanic installs Mega Power, under $100 if you do it yourself. Mega Power is shown here.

Those are now the 2 ways to fix your cars dirty lifter problem.

It's true that mechanics charge $2000 or more to clean out and replace dirty, affected lifter and valve parts. Our way is cheaper! About $250 if a mechanic sells you the service. Under $100 now while on special if you install it. It's easy, and I'm here to help you.

Order now! Mega Power Valve Treatment is shipped to your door in a few days with directions and phone help if needed. If you want a quiet motor, avoid an expensive repair bill, try this product with many happy users. Only 2 refunds ask for last 267 day.

Ordering Info

• Order one Mega Power Valve Treatment. Includes 6 items shown. Easy-to-follow directions. Phone help if needed- a free $100 value. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

 

Order 2 Treatments to clean an protect both your car motors and save $40. 12 items. $125+ $15s&h=$140 total. Not $190. Order for both cars to protect them, now, since you're thinking about it! Save $40.  Offer can end without notice.

Please note: This review of the above products explains the best, and cheapest way to restore your motor's strong quiet valve lifter performance again.

Our Review.

The 8 to 24 engine parts known as valves in your engine, and their lifters perform the breathing function in your motor, and cause your problem.  The noise they produce appears your when motor oil can no longer remove varnish and sticky residues on those items.

Before I show you how to install this Mega Power Product to end your motor's valve lifter noise, a little education about why it happens, and how Mega Power works to end the tap cause will also teach you how to avoid most other engine transmission radiator and steering problems, too.

Knowing that info for valve care includes advantages to avoid other motor problems, now in the making, [and avoids transmission problems if you add this product to its fluid]. This review will show you how to keep your engine and transmission of all your cars trouble-free and your budget healthier!

• The Mega Power Brand method of Car Care has saved me and the many thousands of other car and equipment owners tens of thousands of dollars by it advantages to remove internal acid, wear, friction and their performance declining problems that cause your present engine problem.
• As a mechanic, and many mechanics who understand  - not just how to replace bad parts, but have taken the Mega Power Training about How to fix your valve lifter noise mechanical problem chemically, is what also restore's a  tuned, serviced, or repaired car's great like-brand-new performance, and keeps it that way indefinitely.
• That's this same Mega Power Method I want you to use to end your tap problem!
• As a mechanic, Mega Power Treatment is the inside secret I use to make the cars I fix, tune, and service, run like they instantly have a bigger engine - yet get 20 to 40 more miles on fill ups each week like a smaller motor gets.
• You want and need those Mega Power's tap ending, valve lifter noise fix advantages, also! No other product has those advantage!

Directions to stop valve lifter noise.

Mega Power uses 2 steps: Step One use 3 items in the gas and oil to clean ,remove, and stop dirty combustion conditions that slip down into your motor oil to jam lifters and stick valves.

Step Two uses 3 item a week later to finish the cleaning wherever oil goes cleaning the piston rings, valves, and lifters, ending the valve lifter tap permanently!

Mega Power's protective anti-wear coating - a $100 value by itself, but included as MC+ then keeps every top and bottom valve and lifter part clean and long wearing - resulting in a like-new quieter operation. Your motor needs this treatment to stop its valve lifter noise!

It's true that mechanics charge $2000 or more to clean out and replace dirty, affected lifter and valve parts. Our way is cheaper! About $250 if a mechanic sells you the service. Under $100 now while on special if you install it. It's easy, and I'm here to help you.

Order now! Mega Power Valve Treatment  is shipped to your door in a few days with directions and phone help if needed.

Ordering Info

• Order one Mega Power Valve Treatment. Includes 6 items shown. Easy-to-follow directions. Phone help if needed- a free $100 value. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

Order 2 Treatments to clean an protect both your car motors and save $40. 12 items. $125+ $15s&h=$140 total. Not $190. Order for both cars to protect them, now, since you're thinking about it! Save $40.  Offer can end without notice.

Order 6 Mega Power Treatments to service 6 motors. Fleet or mechanics resale value. 36 items. $300+ $20s&h=$320 total. Not $450. Order now! Save $130.

While I use this web site to train mechanics in this expertise, to increase their customer-pleasing, profit-improving capabilities, I explain its easy install way so you or any non-mechanical man or women car and equipment owner can get the same professional results.

So read along and let me introduce the best,  easiest, and only product solution known to end your valve lifter noise.

Valve lifter noise:

It occurs when friction drag and sticky residues jam lifters, or slows down the closing of your engine valves. That jam or unnatural slowness creates a space and your tap!

This  covers a Mega Power Treatment using 6 items found to stop your troublesome, stuck valve lifter noise makes.

Lifters are thumb size devices - one for each of your motor's  8 to 24 valves having 2 functions:

1. Lifters, or adjusters as I call them, one lifter for each of your motor's fuel and exhaust valves, push them open and close - with a cam assistance, to let fuel in, and exhaust out of your motor - a dozen times a minute as you drive down the road. See picture above. That's the first job of a lifter.
2. Because engine valves take the motor's worst punishment under 1800 degree temperatures, even though heavily oiled to cool and lube them, valves wear out the fastest- causing a drop of power and noisy operation - both are worrisome and costly negatives to correct - and avoid, if possible.
3. To overcome the wear factor, engineers designed lifters to have a pencil-eraser size little piston that expands under oils pump pressure to take up wear space as valves wear - to keep power up, and engines quiet operating.  The second job of a lifter.

Since a lifter or its valve  is  now causing your engine problem, I'll end that worry for you! My tips, and product suggestion will return "their quiet operation" into a surprisingly better running car. This also avoids an expensive repair. That's why you're here! To do so...

What You should know...

Because many kinds of valves operate to make engines and transmissions and other components work, valves and lifters become troublesome when dirty, worn, and this deters running and shifting and cooling performance negatives you are experiencing.

Dirty moving parts is what cause "millions of premature engine and transmission repairs" last year. So says a National Transmission Association Forecast Builtin - about what to expect in the near future also.

If you think about it, when your car or equipment was new, lifters and other parts were clean, fit together, are easily movable, ran dependably, and help produce the most zip, power, and best fuel economy - you bought the car for.  However....

You can blame valve lifter noise, and its tapping sound - and years-shorter engine life, and shorter transmission life - for that matter, on acidic residues that the motor makes.

Just a thin sticky acidic film - which eats away those surfaces, increases friction drag,  faster wear increasing problems, and a foothold for residues  - without your knowledge - as you start the motor and take off, and drive  here and there everyday - until residues and or friction causes the valve lifter noise - or another car and worry producing negative in your life.

Many troublemakers. A Mega Power Complete Solution.

I'll show you how to end both problems.

Sure, you use good oil - but sludge and residues form anyway, create sudden valve lifter noise, and wear out your motor and its power years faster. How so?

This results from combustion - about 1800 degrees, and acidic compounds which slip pass the piston, and mix with oil. There, they create residues. What diesel and gas and motor oil filters don't get, coat every piston and gear part.

As more heat, acids, and combustion create more varnish and residues some residues travel to and block the valve lifters of oil at the end of the oil supply route.

Valve lifter noise appears.

The tap problem happens when lack of oil from blockage causes the adjuster to drop - like a tire with a hole in it, and a space appears.

As the space closes on each rotation a hammer-like smack occurs.  That is the cause of valve lifter noise and tap tap tap. Good oils can't prevent this problem - though the ads say so!

What us mechanics are trained to do to end valve lifter noise.

We take your engine apart, clean every part, machine others, and replaces all the lifters - for a $3000 plus cost.

How Mega Power Engine Valve Treatment Stops valve lifter noise for good!

Mega Power follows a 2 step treatment where acids are neutralized as you add the products to the gas and oil, and a cleaning, freeing operation works as you drive. This returns the motor to its original quiet operation. Imagine that pleasing development!

While some part store additives are are sold for valves and cleaning, most are thick honey-like and only muffle the sound, and others use solvents to flush the motor - now proving damaging.

Mega Power's method provides a new Hi-tech way to solve the valve lifter noise problem. Doing so with crawling cleaners - 6 of them! That chemically penetrate where oil cannot go to clean and free the lifter. This action opens the passage way - again letting oil pump up the little adjuster in the lifter - closing the gap, returning quiet to the engine again!

Besides that, Mega Power 6 ingredients provide other beneficial anti-wear, conditioners, and friction modifiers your motor needs. Their bathing of every part cleans them, frees and coats them, adding a slippery protective film on every part.

That Mega Power Product and its Treatment Advantage is what has been found to return the original near new quiet strong operation.

That's what you are after, isn't it?

With oil free and flowing again the lifter adjuster rises closing the gap - ending the tap as you drive. Mega Power does so at a fraction of the cost of actual repair. Results are permanent.

Thousands of car owners have opted for the Mega Power 6 item cleaner below as Mega Power cleans  the passage ways and lifters of residues. These 6 items have been found to remove the tap causing residue formation that makes valves and their lifters stick.

Directions to stop valve lifter noise.

Mega Power uses 2 steps: Step One use 3 items in the gas and oil to clean and remove dirty conditions that slip down into your motor.

Step Two uses 3 item a week later to finish the cleaning wherever oil goes cleaning the piston rings, valves, and lifters, ending the valve lifter tap.

The protective anti-wear keeps every part clean and slows wear - resulting in a like-new quieter in operation. Your motor needs this treatment to stop its valve lifter noise!

It's true that mechanics charge $2000 or more to clean out and replace dirty, affected lifter and valve parts. Our way is cheaper!

Order now! Mega Power Valve Treatment  is shipped to your door in a few days with directions and phone help if needed.

Ordering Info

• Order one Mega Power Valve Treatment. Includes 6 items shown. Easy-to-follow directions. Phone help if wanted. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

As a mechanic, taking motors and transmissions apart, you see 3 things happen that cause the valve lifter noise  - and rough shift problem.

1. This internal spreading around of residues which then gum up the pistons valves and their lifters. And shift valves. Cause tapping.
2. Acids etch your piston bearing and gear surfaces creating friction.
3. Friction and binding= more friction to wear out your car years faster. That makes engines and transmissions seem worn out, but eye balling them only show roughness and residues.

Mega Power Engine and Transmission Treatment clean. heal, smooth and fill worn spaces. This makes a complex problem solver like no other!

Mega Powers other advantages all your cars and equipment need

• The motor's PCV system - a device added by law to all engines to curb smog, sends some of the vaporous acids, moisture and un-burnt fuel from the motor oil area, back up into the fuel, air entree  stream for re-burning.
• That's not good for the top of the motor, nor the bottom parts.
• As Mega Power cleans by vapor action the PVC system - as well as wherever fuel air combustion blowby oil and exhaust go a breathing and cleaner combustion and more horsepower out put results.

As your motor's mixture of heat, moisture, and sulfurs spreads into the motors oil, oil breakdown [sludge] forms. Sludge circulates into valve lifters, causing oil blockage - lifters are hydraulic adjusters that use motor oil to take up wear spaces.

When residue blockage occurs, lifters - you have one for each of your 8 to 24 valves] collapse. A space then appears between the lifter and valve.

As this occurs lifter rotation smacks the valve, making a hammer blow tap sound. Usually an engine overhaul needing remedy. However...

A new product from Mega Power removes sludge and frees the  lifter, which closes the space and ends the valve lifter noise.

New types of cleaners, conditioners an acid neutralizers, along with co-polymers - covered below, from Mega Power will correct those conditions and mechanic can learn the install process from this article.

Blowby fumes - always full of acids, results from extremely hot combustion slipping pass the pistons rings - where those fumes enter the motor oil area. Bigger engines have more blowby. However, with time, residues slow the piston rings ability to flex and block blowby, and more blowby escapes - and full horsepower development lowers a bit.

Acids pit and remove surface rubbing material - creating faster wear and friction. A second form of  power loss. Oil break-down forms [a sludge], circulating in a gravy-like goo.

That tar-like goo is what coats your valves making them slow closing, and blocks oil flow needed to keep your valves hydraulic lifters [adjusters] tight and quiet operating.

When sludge blocks oil flow to the lifters, lifters collapse, a space develops, and the tap tap tap sound appears. Get it? Complicated - right?

Well, the point being, sludge is caused by blow-by  and is the 3rd causes of valve tap - and Mega Power ends all 3 dirty problems for you, you thought your good oil was suppose to do - but, can't!

How Mega Power Stops valve lifter noise for good!

 

I read of ending your motor valve lifter noise in 3 ways. Some good, some harmful. For example...

1. Solvent engine flush additives, called engine flushes, are often considered as a remedy to end lifter tap. However, they cause engine failure problems. Stay away from those products.
2. The mechanic's repair way. The common method is take apart your engine and have it basically rebuilt. A mechanic dismantles the top half of your motor. Noise causing dirty valve parts are removed, required machining performed to clean-them-up. Deeper in the motor your motor's many hydraulic lifters are yank out like a dentist pulling teeth, and new lifters installed, and your motor reassembled, as the fix. Cost $3500.
3. The other way  I like to stop valve lifter noise - and I promote that's cheaper is to install a new product called Mega Power - shown below.  Mega Power avoids valve damage in several ways. One way is that it enhances lubrication and oil delivery with its cleaning ingredients. This powerful feature stops valve lifter tap by having the ability to go where oils and other additives cannot.  The freeing of stuck valve lifters expands them and closes a gap. This ends the noise and tapping. Is that what you're after?
4. Come back and Read Dougs experience.  

Thousands of car owners have opted for the Mega Power 6 item cleaner  above as this cleans all 6 areas causing the residue formation that makes valves and their lifters stick.

Directions and the install are easy and driving stops the valve lifter noise.

Mega Power uses 2 steps: Step One use 3 items in the gas and oil to clean the top part of your motor.

Step Two uses 3 item a week later to finish the cleaning and add protective anti-wear to keep every part clean and slower wear - and like-new quieter in operation. Your motor needs this to stop valve lifter noise!

Order now and I'll ship this Mega Power Valve Treatment to your door. In a few days your motor will return to its best and quietest operation -at a fraction of what actual repair cost. Comes with a 12 month guarantee, too!

Ordering Info

• Order one Mega Power Valve Treatment. Includes 6 items shown. Easy-to-follow directions. Phone help if wanted. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

How valve lifter noise or tap starts.

You can blame valve lifter noise, and its tapping sound - and years-shorter engine life, and transmission life -for that matter, on combustion temperatures - about 1800 degrees, and acids that form from components in diesel and gas and motor oils.

With heat and combustion escaping down pass your pistons into your oil, - acids, residue sand friction form to cause tapping. As a mechanic, taking motors apart, you see 3 things happen Mega Power does to end valve lifter noise.

1. Acids create sticky residues on valves and lifters causing the tap. Mega Power neutralizes acids ending their tap and wear making ways.
2. Acids etch away the shinny smooth part surfaces causing more drag, faster engine transmission wear out. And binding troubles on valves and lifters. Mega Power heals and smooths those surfaces ending the tap, restoring power, and quieting thier noisy ways.
3. Cleaners and MC+ clean and free lifters and valves from 2 sides to return a smooth, more powerful and quiet operating engine again for you!  Works in minutes and immediate results return.

Your engines internal creating residues are what gum up the pistons, valves and their lifters mega Power removes.

Acids come from combustion's escape - called Blowby, which sends heat, moisture, and sulfurs pass the piston into the oils - [as refining may not have refined enough or all the sulfur out of fuel and motors oils].

This PCV system - sucks up some of the vaporous acids, moisture and un-burnt fuel from the motor oil area, back up into the fuel, air entree system for re-burning. That's not good for the top of the motor,  and Mega Power cleans, then stops that harmful state. Complex - right? But needed!

As this mixture of heat, moisture, and sulfurs spreads into the motors oil, oil breakdown [sludge] forms. Sludge circulates into valve lifters, causing oil blockage - lifters are hydraulic adjusters that use motor oil to take up wear spaces.

When residue blockage occurs, lifters - you have one for each of your 8 to 24 valves] collapse. A space then appears between the lifter and valve.

As this occurs lifter rotation smacks the valve, making a hammer blow tap sound. Usually an engine overhaul needing remedy. However...

A new product from Mega Power removes sludge and frees the  lifter, which closes the space and ends the valve lifter noise.

New types of cleaners, conditioners an acid neutralizers, along with co-polymers - covered below, from Mega Power will correct those conditions and mechanic can learn the install process from this article.

Blowby fumes - always full of acids, results from extremely hot combustion slipping pass the pistons rings - where those fumes enter the motor oil area. Bigger engines have more blowby. However, with time, residues slow the piston rings ability to flex and block blowby, and more blowby escapes - and full horsepower development lowers a bit.

Acids pit and remove surface rubbing material - creating faster wear and friction. A second form of  power loss. Oil break-down forms [a sludge], circulating in a gravy-like goo.

That tar-like goo is what coats your valves making them slow closing, and blocks oil flow needed to keep your valves hydraulic lifters [adjusters] tight and quiet operating.

When sludge blocks oil flow to the lifters, lifters collapse, a space develops, and the tap tap tap sound appears. Get it? Complicated - right?

Well, the point being, sludge is caused by blow-by  and is the 3rd causes of valve tap - and Mega Power ends all 3 dirty problems for you, you thought your good oil was suppose to do - but, can't!

How Mega Power Stops valve lifter noise for good!

You may have many questions about your engine tap.

This review compares traditional repair to end this dirty engine problem, with new products from Mega Power. Mega Power's method chemically penetrates where oil can go to cleans to free the lifter - ending the tap as you drive. Mega Power does so at a fraction of the cost of actual repair. Results are permanent.

Mega Power stops engine valve lifter noise for a smoother quiet running motor - at 1/10th the cost of repair.

The two ways of ending your motor valve lifter noise

1. The mechanic's repair way. The common method is to pay a mechanic to dismantle the top half of your motor. Dirty valve parts removed require machining to clean-them-up. Deeper in the motor your motor's many hydraulic lifters are yank out like a dentist pulling teeth, new lifters installed, and your motor reassembled, as the fix. Cost $3500.
2. The other way is to install a new product called Mega Power - shown below. Mega Power works using a new breed of problem-solving chemistry that goes where even synthetic oil can't go. Its 6 ingredients of very powerful cleaners, conditioners, and valve lifter noise ending friction modifiers stops valve lifter tap fast. See Demo.

Anyone can easily install Mega Power Valve-Lifter-Noise Treatment. Shown here, Mega Power is easy to install by anyone - nothing to take a part. Works fast and works as your drive.

Guaranteed, if it doesn't end the noise, will prevent it from getting worst for 6 months to a year - to help you raise funds for its actual repair. Please note: 2 refunds last 267 days.  Is this the help you're after.

Directions: You add 3 items shown, the drive for one week. Add the other 3 a week later at an oil change. That is what works to end your valve lifter noise. Mega Power is sent to your door by FedEx in about 3 days with directions and phone help, if needed. Please note...

In transmissions, a similar valve - a shift valve causes rough, slow, or jerky shifting and mega Power ends that dirty valve hangup problem too - returning a smooth trouble free service to that component, helping car owners happily avoid another car fixing expense.

Mechanics that promote Mega Power charge Just $250 to install Mega Power. Just $100, if you install it yourself. It's easy, and takes no skill, and nothing to take apart. Any man or women will get professional results - Guaranteed! Those are your choices...

Mega Power will add years more quiet, dependable life to your motor at a much lower expense than repair, at $250 if a mechanic installs it for you. Under $100 if you install it yourself. If you read this far, you need to order Mega Power. Order online or by phone.

Ends valve lifter noise.

Ordering Info

• Order one Mega Power Valve Treatment. Includes 6 items shown. Easy-to-follow directions. Phone help if wanted. Satisfaction Guarantee. Shipped to your door by FedEx in 3 days. Just $80, plus $15 s&h= $95 total.

Order 2 Treatments to clean an protect both your car motors and save $40. 12 items. $125+ $15s&h=$140 total. Not $190. Order for both cars to protect them, now, since you're thinking about it! Save $40.  Offer can end without notice.

first paragraph ...